User's Manual
Table Of Contents
- Congratulations!
- Safety and Use
- Leica EZ4, Leica EZ4 E or Leica EZ4 W
- Eyepieces (Only for Leica EZ4)
- Photography Using the Leica EZ4 E or Leica EZ4 W
- Get Set!
- USB Mode – Capturing and Adjusting Images Using a Computer
- SD Mode – Capturing Images Without a Computer or Without a Wireless Device
- Adjusting Settings While in SD Mode
- WiFi Mode – Capturing and Adjusting Images Using a Wireless Device (Only Available for Leica EZ4 W)
- Ethernet Mode – Capturing and Adjusting Images Using a Network
- The Camera Remote Control (Optional)
- Care, Transport, Contact Persons
- Specifications
- Dimensions
Leica E Series User Manual Leica EZ4, Leica EZ4 E or Leica EZ4 W 20
Disabling the automatic shuto
To disable the automatic shuto, follow these
steps:
1. Switch the microscope o.
2. Press and hold the
and
buttons on
the light control unit simultaneously while
you switch on the microscope.
The LEDs ash twice slowly and then remain
switched on. The automatic shuto is now
disabled.
Controlling the Automatic Shuto
Automatic shuto
The factory settings of the EZ4 models
switch the instrument o automatically
after one hour without user interaction. This
automatic shuto helps to conserve the light-
emitting diodes and save energy.
Enabling the automatic shuto
To re-enable the automatic shuto, follow
these steps:
1. Switch the microscope o.
2. Press and hold the
and
buttons on
the light control unit simultaneously while
you switch on the microscope.
The LEDs ash three times slowly and then
remain switched on. The automatic shuto is
now re-enabled.