User's Manual
Table Of Contents
- Congratulations!
- Safety and Use
- Leica EZ4, Leica EZ4 E or Leica EZ4 W
- Eyepieces (Only for Leica EZ4)
- Photography Using the Leica EZ4 E or Leica EZ4 W
- Get Set!
- USB Mode – Capturing and Adjusting Images Using a Computer
- SD Mode – Capturing Images Without a Computer or Without a Wireless Device
- Adjusting Settings While in SD Mode
- WiFi Mode – Capturing and Adjusting Images Using a Wireless Device (Only Available for Leica EZ4 W)
- Ethernet Mode – Capturing and Adjusting Images Using a Network
- The Camera Remote Control (Optional)
- Care, Transport, Contact Persons
- Specifications
- Dimensions
Leica E Series User Manual Get Set! 41
5. If a mode button other than USB mode is lit
green, then press the USB mode button and
wait until both the status LED and the USB
mode button is green.
6. You are ready to launch the Leica software.
Follow the software instructions to adjust
and capture an image.
7. While in USB mode, you can connect the
provided HDMI cable from the camera to
an HD monitor or HD projector to share the
image.
Note: You won't be able to write or read
the SD card, if the camera is connected
via USB cable with your PC.
Note the image aspect ratio while in USB
mode is 4:3. To avoid distortion if your
projector or monitor is set to a 16:9 aspect ratio,
you will need to adjust the aspect ratio of the
projector or monitor to 4:3 using the controls of
the projector or monitor.
USB Mode – Capturing and Adjusting Images Using a Computer (Continued)
Note the image resolution on the HD
projector or monitor is limited to the live
image resolution setting in the software.
4:3 aspect ratio 4:3 aspect ratio image on a screen set to an
aspect ratio of 16:9