User's Manual
Table Of Contents
- Congratulations!
- Safety and Use
- Leica EZ4, Leica EZ4 E or Leica EZ4 W
- Eyepieces (Only for Leica EZ4)
- Photography Using the Leica EZ4 E or Leica EZ4 W
- Get Set!
- USB Mode – Capturing and Adjusting Images Using a Computer
- SD Mode – Capturing Images Without a Computer or Without a Wireless Device
- Adjusting Settings While in SD Mode
- WiFi Mode – Capturing and Adjusting Images Using a Wireless Device (Only Available for Leica EZ4 W)
- Ethernet Mode – Capturing and Adjusting Images Using a Network
- The Camera Remote Control (Optional)
- Care, Transport, Contact Persons
- Specifications
- Dimensions
Leica E Series User Manual Safety and Use 9
Safety Instructions (Continued)
Instrument safety and EMC
Our device has been designed, produced and
tested in compliance with
O IEC EN 61010-1: Electrical equipment for
measurement, control and laboratory use
– Safety – Part one: general requirements
O EN 60950-1: Information technology equip-
ment – Safety – Part one: general require-
ments
O Radio interference suppression in compli-
ance with EN 55011 class B
O Noise immunity in compliance with
DIN EN 61326-1.
The device meets the requirements of EU
directives
O 2014/35/EU Low voltage directive
O 2014/30/EU EMC directive
O 2011/65/EU RoHS directive
and carries the CE mark.
The device must be disposed of in
accordance with 2012/19/EU WEEE
directive.
Intended for indoor use only in all EU member
states, EFTA states and Switzerland.
Leica EZ4 W
O EN 300328: Electromagnetic compatibility
and Radio spectrum Matters (ERM); Wide-
band transmission systems; Data transmis-
sion equipment operating in the 2.4 GHz
ISM band and using wide band modulation
techniques; Harmonized EN covering essen-
tial requirements under article 3.2 of the
RED directive.