User's Manual

Not For Resale – Free Download at http://www.joe-chan.com/manuals
Note: with the camera back open, three gold-
plated electrical contacts (29) are visible on
the back and in the camera housing. These
contacts are corrosion-free, and relatively
insensitive to dirt and dust. Special care of
these contacts is not necessary.
When loading a new film, however, ensure
nevertheless that the contacts are kept clean
and dry.
Inserting the film
5. Hold the film cartridge in the right hand and
insert it about half-way into the empty
chamber.
6. Take the film leader and pull it into the take-
up chamber spool (28), as shown in the
dia- gram (27) of the camera housing.
7. Using your fingers push the cartridge and
the film leader carefully into the camera.
Note: the end of the film must be tapered, as
is the case with made-up films. Under ordi-
nary conditions it does not matter if the film
end projects through the three-post assemb-
ly. In extremely cold, dry weather, however,
the end may break off, and the drawing should
then be followed exactly.
Important
Do not check correct loading when the
camera is open. The base plate is designed
such that it guides the film into the correct
position when attached to the camera.
9