User's Manual

Not For Resale – Free Download at http://www.joe-chan.com/manuals
Closing the camera
8. Replace the camera back.
9. Hook the base plate over the external
mounting post on the camera body (25).
10. Fold the base plate back into its normal
position, ensuring that the camera back is
in full contact so that the base plate enve-
lops it.
11. Lock the back using the base plate catch.
Transport of the film to the first frame
12. Advance the film to the next frame by
means of the quick-wind lever, and re-
lease the shutter.
13. Gently pull the film taut by turning the
rewind crank (13) in the direction of the
arrow. The film is properly transported
when the rewind crank turns backwards
when the quick-wind lever is operated
again.
14. Finally, press the shutter release button
again and cock the shutter for the third
time. The frame counter (6) now reads 1
and the camera is ready to shoot.
Setting the film speed
The dial for setting the exposure meter to the
film speed (24) can be used to set values from
ISO 6/9° to ISO 6400/39° (ASA 6/9 DIN to
ASA 6400/39 DIN; the ISO designation is that
generally used internationally). To set the film
speed:
1. Press the centre of the dial down and turn
it until the two triangles are aligned
opposite the desired film speeds (DIN
above, ASA below).
2. When released, the disc will engage and
spring back flush with the surrounding ring
if it has been set properly.
10