User's Manual

Not For Resale – Free Download at http://www.joe-chan.com/manuals

4. Now open the base plate.

5. Open the camera back.

6. Remove the film cartridge.

When the film is not fixed to the cartridge core,

for example when bulk film is used, it may

become separated from the core if the

advance lever is operated forcefully after the

last frame has been exposed. In this case,

proceed as follows:

1. Remove the base plate of the camera in a

completely dark room.

2. Hold the camera with the base plate open

and facing downwards.

3. Slowly operate the quick-wind lever several

times until the film protrudes far enough to

be grasped and pulled out. If necessary,

gently hit the camera against the palm of

your hand.

Fitting the lens to the camera

1. Hold the lens by the fixed ring (15).

2. Align the red lens alignment button (4) with

the lens release button (2) on the camera

body.

3. Fit the lens in this position, ensuring that it

is perpendicular to the front of the camera

4. Turn the lens slightly to the right to latch it

audibly and perceptibly into place.