User's Manual

Not For Resale – Free Download at http://www.joe-chan.com/manuals
Compatible flash units
Thanks to its compact dimensions and its
dedicated design, the LEICA SF20 is particu-
larly suitable for use with the LEICA M6 TTL. It
is very simple to use, as it is equipped with an
integrated adapter foot with additional control
and signal contacts for automatic transfer of a
range of data and settings. In addition, it
features a number of additional functions of
interest.
However, the photographer can also fit any
other proprietary flash unit, provided they are
equipped with standard sockets, and also on-
camera flash units with standardised adapter
foot. These flash units are fired via the centre
contact (x,11). We recommend the use of
modern thyristor-controlled electronic flash
units.
Fitting and connecting the flash unit
When mounting a flash unit on the hotshoe of
the LEICA M6 TTL, ensure that the adapter
foot of the flash unit is fully inserted and firmly
secured by means of the tightening nut, if
available. This is especially important in the
case of flash units with additional control and
signal contacts, as movements of the flash unit
within the adapter foot may lead to the contact
being broken and consequently to
malfunctions.
The coaxial contact (x,22) for connecting flash
units with cable connection is located below
the accessory shoe at the back of the camera.
Note: the camera and flash unit must both be
switched off before the flash is fitted.
39