Instruction Manual

143
Note:
You can also switch from an enlarged picture directly
to another picture, which will then be shown at the
same enlargement. To do this press the left or right
direction button again while holding down the PLAY
button (1.26).
By turning the setting dial to the left (anticlockwise,
starting from normal size), you can simultaneously view
4 – or by turning the dial further 9 – pictures in the
monitor.
• Up to 9 reduced images are shown in the monitor
(1.32) including the picture previously being viewed at
normal size, which is marked with a red border.
You can use the four direction buttons to navigate
freely among the reduced images, and the relevant
image is marked accordingly. You can then view this
image at normal size by turning the setting dial to the
right.
Note:
When 9 pictures are displayed, turning the setting
dial further to the right places the red frame around
the entire group of pictures, which then allows you to
"scroll" more quickly, a block at a time.
C. DELETING PICTURES
When a picture is displayed in the monitor, you have an
opportunity to delete it if you wish to do so. This can
be useful, for example if the pictures have already been
saved to other media, if you no longer require them or if
you need to free up more space on the memory card.
The Leica M Monochrom allows you to delete single
pictures, or all pictures at the same time, as required.
Notes:
• Deleting is only possible in review mode, but
regardless of whether a picture is being displayed at
normal size or several reduced pictures are displayed
(but not if the 9 picture review is activated with a red
frame around the entire block, see p. 147).
• For protected pictures, the protection must first be
cancelled before they can be deleted (see also next
section).
Important:
Deleting pictures is irreversible. Pictures cannot
subsequently be recovered.
Procedure
1. Press the DELETE button (1.24).
• The corresponding sub-menu appears in the
monitor (1.32).
Notes:
• The delete process can be cancelled at any time by
pressing the
DELETE button again.
• The following controls and their functions are not
available during the entire delete process: the
INFO
button (1.22) and the delete protection function.