User's Manual

Hold the take-up spool in the right hand, and the film cartridge in the left, with both spool knobs
pointing up. Now push the beginning of the film under the clamping spring of the take-up spool
as far as it will go. The perforated film edge must lie close against the spool flange, as shown in
the illustration.
Next, draw out just enough of the film leader from the cartridge so that you can insert the two
parts-the cartridge and the take-up spool - into the camera. The spool knobs should still point
upwards and remain visible while the film slides into the film slot in front of the open camera
back.
The film cartridge and the take-up spool must be
firmly pushed home to ensure that the film lies
properly between the guide-rails.
Not For Resale – Free Download at http://homepage.ntlworld.com/joechan/manuals