Operation Manual

132 / 
If lenses with focal lengths of 28 (Elmarit from serial
number 2411001), 35, 50, 75 and 135mm are used,
the associated bright-line frame automatically ad justs
to the combinations 28+90mm, 35+135mm, 50+75mm.
In the middle of the viewnder image is the rectangular
distance metering image, which is brighter than the
surrounding image eld. All lenses with focal lengths
from 16 to 135mm are linked to the range nder
when used on the Leica M9.
If the exposure meter is turned on, the exposure
meter LEDs and the ash symbol LED appear at the
lower edge of the viewnder image.
For more information about distance and exposure
metering and on using ash, refer to the correspond ing
sections on p. 134/135/143.
IMAGE FIELD SELECTOR
The image eld selector (1.8) expands the possibilities
of the Leica M9 viewnder. This built in universal
viewnder allows you to activate bright-lines at any
time, which do not belong to the lens currently being
used. You can then see immediately if, for compo-
sition reasons, it would be better to photograph the
relevant subject using a dierent focal length.
Moving the lever outwards, i.e. away from the lens,
shows the image eld limits for 35 and 135mm focal
lengths.
Moving the lever to its vertical central position dis-
plays the image eld limits for 50 and 75mm focal
lengths.
Moving the lever inwards, i.e. towards the lens, shows
the image eld limits for 28 and 90mm focal lengths.