Operating Instructions

170
Overview of using the flash with SCA -3501/3502M3 adapters
Setting on the flash unit (with SCA 3501):
Camera TTL-automatic Computer automatic Manual flash with
setting fixed performance
X or B
(any program)
m
A
T
The operating modes m , A , T , P are no longer effective, an exposure measurement for ambient light
does not occur. The exposure generally occurs with 1/250s at X or for any length with B with the
aperture set manually. The flash light is controlled according to the operating mode.
In the operating mode m flash exposures with shutter speeds between 16s and 1/250s can be made.
The available light is metered and controlled with the light balance. The flash light is controlled accor-
ding to the operating mode.
The aperture priority mode is swit-
ched off, 1/250s is always used.
The shutter speed priority mode
*)
is
active and carries out a regular expo-
sure with the available light. For this
reason the additional flash should be
reduced via flash exposure compen-
sation.
The set automatic operating
mode (
A or T ) carries out a re-
gular exposure
*)
with the availa-
ble light.
For this reason, the flash
should be reduced via flash ex-
posure compensation.
The set automatic operating
mode (
A or T ) carries out a re-
gular exposure
*)
with the availa-
ble light.
The full flash performance is
added.