Manualshelf

Operating Instructions

ManualsBrandsLeica ManualsCamerasLeica R9
181182183184185186187188189190
182
Error
code: Cause: Remedy:
Camera in the metering flash mode (
F
) Flash unit must be set to manual
and flash unit in TTL control
Camera in the metering flash mode (
F
) Flash unit must be set to manual
and flash unit in computer automatic
Camera in strobe flash mode with camera modes Set camera to
m
or
A
P
or
T
Camera in the metering flash mode (F) Set the shutter speed setting ring to any time
and shutter speed setting ring at X, except for X or B.
flash unit in
The film speed is below ISO 25/15°.
The film speed is above ISO 400/27°.
The metering flash function is only possible for film
speeds between ISO 25/15° and ISO 400/27°, so
another film speed must be used.
Warning displays (error codes) for incorrect
settings in flash mode
The camera’s manual operating concept and the
many options, particularly with system flash
units, allow settings that do not make sense. In
such cases, an error message e.g.
appears in the viewfinder.