Operation Manual

Rugby 670/680, Applications

5 Applications

5.1 Setting Forms

Setting Forms

step-by-step

Application shown using the Rod Eye 140, Classic Receiver.

Step Description

1. Set up the Rugby on a tripod.

2. Set up the tripod on a stable surface outside the working area.

3. Attach the receiver to a rod.

4. Turn on the Rugby and the receiver.

5. Set the base of the rod on a known point for the finished height of forms.

6. Adjust the height of the receiver on the rod until the on-grade (centre-line)

position is indicated on the receiver by:

•the centre bar

• the green flashing LED

•a solid audio tone

7. Set the rod with the attached receiver on top of the form.

8. Adjust the height of the form until the on-grade position is again indicated.

9. Continue to additional positions until the forms are levelled to the rotating

plane of the Rugby.

005841_001

1 + 2