Operation Manual
41
Notes:
• Depending on the exposure mode (see "Exposure control“ section on
p. 42) the exposure graduations are produced by changing the shutter
speeds and/or apertures.
• The sequence of the exposures is: over exposure, correct exposure, under-
exposure.
• When using bracketing, all
AUTO ISO settings are defined (see p. 34):
- The sensitivity determined automatically by the camera for the uncorrect-
ed picture is also used for all other pictures in a series, i.e. the ISO value is
not changed during a series.
- The settings in the
AUTO ISO submenus are ineffective, i.e. the camera's
full shutter speed range is available.
The working range for the bracketing series can be restricted according to
the initial exposure setting.
• Regardless of this, the specied number of pictures is always taken, which
may mean that several pictures in a series have the same exposure at the
end of the working range.
• The function remains active until it is deactivated in the menu or the cam-
era is turned off.
VALUES ABOVE AND BELOW THE METERING RANGE
If the level of the ambient brightness is below the camera’s metering range,
accurate exposure metering is not possible. Any values that are then shown
in the viewfinder can lead to incorrect exposure results. For this reason, in
such cases, (2.2b) appears in the viewfinder.