Operation Manual

61
DELETING PICTURES
Note:
This function is not available in
INFO review mode (4.5).
1. Press any of the four buttons (1.21, 1.22, 1.24, or 1.25).
• The functions valid in this situation appear in the picture - for 5 s - next to
the corresponding buttons - they are
Protect, Delete and MENU.
2. Press the
Delete button.
• The image  eld shows
- the button functions valid in this situation -
BACK, Protect, OK and All/
Single
- Delete? in the center and Single/All underlined in red for the activated
functions
- if applicable, the symbol (4.2.9) for a protected picture. In such cases,
OK does not appear.
3. Use button (1.25) to select whether you want to delete only the picture
shown or all pictures.
• The relevant displays change: Between
All and Single next to the button
and vice versa in the center.
Notes:
• If deletion of single pictures is active, other pictures can be called up by
turning the click wheel (1.18).
• You can use the
BACK button (see above under 2.) to return to the normal
view.
• You can use button (1.22) to switch directly to the menu for protecting
pictures (see p. 60).
To delete only one picture
4. Press the
OK button to start the delete process.
• The next picture that has not been deleted appears in the monitor.
If the picture deleted was the only one, the following message appears:
No image to display
To delete all pictures
4. Press the
OK button.
• The following query appears in the monitor:
Delete ALL pictures?
Note:
You can use the
BACK button (see above under 2.) to return to the normal
view.
5. Confi rm and press the
OK button to start the delete process.
• The monitor shows the message:
No image to display
Note:
Protected pictures are not deleted. After deleting, the last (highest number)
of the remaining pictures appears.