LEICA S2 Instructions
Umschlag_D.qxp:Umschlag Leica M8 dt_engl. 11.12.2009 10:11 Uhr Seite 1 my point of view LEICA S2 Leica Camera AG / Oskar-Barnack-Str. 11 / D-35606 Solms www.leica-camera.com / info@leica-camera.
Umschlag_D.qxp:Umschlag Leica M8 dt_engl. 11.12.2009 10:11 Uhr Seite 2 1.8 1.37 1.1 1.2 1.7 1.37a 1.37b 1.6 1.9 1.40 1.34 1.30 1.32 1.26a 1.28 1.26 1.25 1.35 1.27 1.5 1.32 1.5 1.29 1.10 1.11 1.33 1.12 1.12a 1.39 1.38a 1.38b 1.38 1.38c/d 1.39 1.13c 1.13a 1.13b 1.13 1.15 1.16 1.16a 1.17 1.48 1.42 1.18 1.14 1.48b 1.42 1.44a 1.45 1.49b 1.49 1.47 1.48a 1.41 1.44 1.3 1.46 1.19 Trademark of the Leica Camera Group/ Registered Trademark © 2009 Leica Camera AG 1.24 1.4c 1.4b 1.
Umschlag_GB.qxp:Umschlag Leica M8 dt_engl. 08.04.2010 11:21 Uhr Seite 2 1.8 1.37a 1.1 1.2 1.7 1.37 1.37b 1.6 1.9 1.40 1.34 1.30 1.31 1.26a 1.28 1.26 1.25 1.35 1.27 1.5 1.32 1.5 1.29 1.10 1.11 1.33 1.12 1.12a 1.36 1.38a 1.38b 1.38 1.38c/d 1.39 1.13c 1.13a 1.13b 1.13 1.15 1.16 1.16a 1.17 1.48 1.42 1.18 1.14 1.48b 1.49a 1.44a 1.45 1.49b 1.49 1.47 1.48a 1.41 1.44 1.3 1.46 1.19 Trademark of the Leica Camera Group/ Registered Trademark © 2009 Leica Camera AG 1.24 1.4c 1.
Inhalt_GB.qxp:Leica M8 deutsch 11.12.
Inhalt_GB.qxp:Leica M8 deutsch 11.12.2009 10:23 Uhr Seite 2 This is a Class B product based on the standard of the Voluntary Control Council for Interference from Information Technology Equipment (VCCI). If this is used near a radio or television receiver in a domestic environment, it may cause radio interference. Install and use the equipment according to the instruction manual. FCC Note: (U. S.
Inhalt_GB.qxp:Leica M8 deutsch Foreword 11.12.2009 10:23 Uhr Seite 3 Dear Customer, Leica would like to thank you for purchasing the LEICA S2 and congratulate you on your choice. With this unique digital SLR camera, you have made an excellent selection. We wish you a great deal of pleasure and success using your new LEICA S2. In order to make best use of all the opportunities offered by this high performance camera, we recommend that you first read these instructions.
Inhalt_GB.qxp:Leica M8 deutsch 11.12.2009 10:23 Uhr Contents FIRMWARE UPDATE Notice: Wherever you see this sign, it indicates improvements to the camera’s functions. In order to access the respective detailed descriptions, just click on the sign. Seite 4 Foreword ...............................................................................3 Warning messages.................................................................6 CE notice ...................................................................
Inhalt_GB.qxp:Leica M8 deutsch 11.12.2009 10:23 Uhr Seite 5 Exposure control Manual shutter speed and aperture setting / Selecting the exposure mode ...........................................37 Shutter speed dial ............................................................37 Click wheel .......................................................................37 Exposure modes Programmed automatic exposure mode ...........................38 Program shift ...................................................
Inhalt_GB.qxp:Leica M8 deutsch 11.12.2009 10:23 Uhr Seite 6 Warning messages • Modern electronic components react sensitively to electrostatic discharge. As people can easily pick up charges of tens of thousands of volts, by walking on synthetic carpets for example, a discharge can occur when you touch your LEICA S2, particularly if it is placed on a conductive surface. If only the camera housing is affected, this discharge is harmless to the electronics.
Inhalt_GB.qxp:Leica M8 deutsch Scope of delivery 11.12.2009 10:23 Uhr Seite 7 Before using your LEICA S2 for the first time, please check that the accessories supplied are complete. A. B. C. D. E. F. G.
Inhalt_GB.qxp:Leica M8 deutsch 11.12.2009 10:23 Uhr Designation of parts Front view 1.1 Shutter release button 1.2 Self-timer LED / Sensor for white balance 1.3 Depth of Field Preview button 1.4 Bayonet with a. Contact strip b. Index point for attaching the lens c. Unlocking button Top view 1.5 Carrying strap clip 1.6 Window for distance scale 1.7 Distance setting ring 1.8 Bayonet for lens hood 1.9 Red alignment button for changing lens 1.
Inhalt_GB.qxp:Leica M8 deutsch 11.12.2009 10:23 Uhr Seite 9 2.1 2.2 2.3 Displays 2. In the viewfinder 2.2 2.4a 2.5 2.7 2.9a 2.9c 2.4 2.1 2.3 2.4b 2.6 2.8 2.9b 2.5 2.6 2.7 Indication of warning message on the monitor Exposure compensation indicator Metering method symbol (not displayed for metering memory lock) a. = Multiple field metering b. = Center-weighted metering c. = Spot metering Flash displays a. Flashing = Flash charging, flash not ready; Lit = Flash ready b.
Inhalt_GB.qxp:Leica M8 deutsch 11.12.2009 10:23 Uhr Displays 3. In the top panel display 3.1 3.2 3.3 3.4 3.5 3.7 3.6 3.9 3.10 3.8 3.11 3.13 3.12 3.14 3.5 3.7 3.6 10 / Displays / In the top panel display Seite 10 Start screen (appears for 4s after turning on the camera, can be switched to the standard screen at any time by tapping the shutter release button) 3.1 Date 3.2 Time 3.3 Folder name 3.4 Camera ready 3.5 Picture number or warning message (see 3.7) 3.
Inhalt_GB.qxp:Leica M8 deutsch 08.04.2010 11:22 Uhr Seite 11 4.1 Displays 4. In the monitor 4.1.1 4.1.2 4.1.3 4.1.4 4.1.5 4.1.6 4.1.10 4.1.9 4.1.8 4.1.7/ 4.1.11 4.1.12 4.2.3 Normal play mode (pictures(s) fill the entire monitor area) 4.1.1 Shutter speed 4.1.2 Aperture 4.1.3 Sensitivity 4.1.4 Number of picture(s) shown 4.1.5 Total number of pictures on selected memory card 4.1.6 Selected memory card 4.1.7 Size and position of section (PLAY only; does not appear if 4.18-4.1.11 are shown) 4.1.
Inhalt_GB.qxp:Leica M8 deutsch 08.04.2010 11:22 Uhr Seite 12 4.3 Image data review 4.3.1.- Functions of buttons 1.20/.21/.23/.24 4.3.4 Displays 4. In the monitor (cont.) 4.3.7 4.3.8 4.3.1 4.3.6 4.3.5 4.3.9 4.3.10 4.3.11 4.3.12 4.3.17 4.3.18 4.3.19 4.3.20 4.3.21 4.3.4 4.4.5 4.4.1 4.3.2 4.3.13 4.3.14 4.3.15 4.3.16 4.3.22 4.3.23 4.3.24 4.3.25 4.3.3 4.4.2 4.4.8 4.4.6 4.4.7 4.4.4 4.4.3 4.5.1 4.5.2 4.5.5 4.5.6 4.5.4 12 / In the monitor Top left quadrant, settings in CAMERA menu 4.3.
Inhalt_GB.qxp:Leica M8 deutsch Menu items 11.12.2009 10:23 Uhr CAMERA menu IMAGE menu Seite 13 Page 1 5.1 5.2 5.3 5.4 5.5 Drive mode Focus Mode Exposure Metering Exposure Compensation Exposure Bracketing Single picture/picture series/self timer AFs / AFc / MF Page 2 5.6 5.7 5.8 Auto Slow Synch Flash Synch Mode Mirror up Mode Limits the shutter speeds used Start or end of exposure Page 3 5.9 5.10 5.11 5.12 5.
Inhalt_GB.qxp:Leica M8 deutsch 11.12.2009 10:23 Uhr Seite 14 Charging the battery Preparations Attaching the carrying strap 1 2 3 4 14 / Attaching the carrying strap / Charging the battery The LEICA S2 is supplied with the required power by a lithium ion battery (A). Attention: • Only the battery type specified and described in this manual, and/ or battery types specified and described by Leica Camera AG, may be used in this camera.
Inhalt_GB.qxp:Leica M8 deutsch 11.12.2009 10:23 Uhr Seite 15 First aid: • If battery fluid comes into contact with the eyes, there is a risk of blinding. Rinse out the eyes thoroughly with clean water immediately. No not rub the eyes. Seek medical attention immediately. • If leaked fluid gets onto the skin or clothing, there is a risk of injury. Wash the affected areas with clean water. There is no need to seek medical attention. Notes: • The battery can only be charged outside the camera.
Inhalt_GB.qxp:Leica M8 deutsch 11.12.2009 10:23 Uhr Seite 16 Preparing the charger If using the charger outside the USA If using the charger in the USA Connecting the charger 1. Insert the appropriate plug for the local mains supply into the charger (B). This is done by simultaneously a. pushing the release button (1.48a) upwards, and b. sliding the plug (1.48) upwards from its normal position. 2. It can then be completely detached upwards. 3.
Inhalt_GB.qxp:Leica M8 deutsch 11.12.2009 10:23 Uhr Seite 17 Inserting / removing the battery to / from the camera Inserting the battery 1. Set the main switch (1.15) to OFF. 2. Slide the battery (C) as far as possible into the battery bay, contacts first and with the positioning groove (1.40) pointing towards the center of the camera. It automatically engages in this position. Charge level displays (3.2) The charge level of the battery is indicated in eight stages in the top panel display (1.11).
Inhalt_GB.qxp:Leica M8 deutsch 11.12.2009 10:23 Uhr Seite 18 Removing 1. Set the main switch (1.15) to OFF. 2. Open the door (1.25) on the right-hand side of the camera by sliding it slightly backwards in the direction of the arrow and then opening it to the right. CF cards 3. Press the eject button (1.26a) in to eject the card part of the way out of the slot, allowing you to 4. completely remove it. 3. Insert the memory card (s) you want to use as follows: a. Slide CF cards into the slot 1.
Inhalt_GB.qxp:Leica M8 deutsch 11.12.2009 10:23 Uhr Seite 19 Important: Follow these instructions exactly when changing the focusing screen. Take the utmost care to protect the sensitive surfaces of the focusing screens from scratches. Changing the focusing screen The LEICA S2 allows you to change the focusing screen for optimum adaptation to the relevant subjects and situations (see also "System accessories / Exchangeable focusing screens“, p. 55).
Inhalt_GB.qxp:Leica M8 deutsch 11.12.2009 10:23 Uhr Seite 20 Leica S lenses Leica S lenses all have characteristic external features: - Their distance setting ring (1.7) works differently depending on which focus mode is set: - In manual mode (MF, see p. 13/22/33) the distance is set as normal, by turning the ring - in this case, it is mechanically coupled to the optical construction from the outset. - In autofocus mode (AFs/AFc, see p.
Inhalt_GB.qxp:Leica M8 deutsch 11.12.2009 10:23 Uhr Seite 21 Eyepiece adjustment Turning the camera on and off The eyepiece (1.16) can therefore be adjusted by ± 2 diopters, so that it is exactly set to match your eye. While looking at the viewfinder image, turn the knurled setting ring (1.16a) until the markings for the spot-metering field are sharp. The LEICA S2 is turned on and off using the main switch (1.15). This takes the form of a lever with three indented positions: After turning on, i.e.
Inhalt_GB.qxp:Leica M8 deutsch 11.12.2009 10:23 Uhr Seite 22 Menu control/ Settings Menu control Most of the modes and settings on the LEICA S2 are operated using menus. Navigating and making settings throughout the menu is extremely quick and easy 1. The menu items are divided into logical functional groups that are accessed directly. 2. Only a few controls are used. 3. Only a few operations are required in each case. 4. Each of three specified menu functions can also be called up directly.
Inhalt_GB.qxp:Leica M8 deutsch 11.12.2009 10:24 Uhr Seite 23 • If you do this from play mode, there is an intermediate stage in which the four fields (4.1.8 - MENU, 4.1.9 - INFO, 4.1.10 DELETE and 4.1.11 – PROTECT) first appear to represent the valid button functions in this situation. 2. Briefly pressing one of the buttons 1.24, 1.23 and 1.21 again selects the first screens for the relevant menu function group, i.e. button 1.24 for CAMERA functions, button 1.23 for IMAGE functions, and button 1.
Inhalt_GB.qxp:Leica M8 deutsch 11.12.2009 10:24 Uhr Seite 24 4. Turning the click wheel (1.18) selects the individual menu items - turning to the right moves down and to the left moves up. All menu items form a continuous loop, i.e. they can all be reached without the division into the three function groups and in either direction. • The submenu appears, containing a list of the options or values that can be set for the relevant function.
Inhalt_GB.qxp:Leica M8 deutsch 11.12.2009 10:24 Uhr Seite 25 Quick access to menu functions For quick operation, you can use the buttons 1.24, 1.23 and 1.21 to directly call up three of the most important or frequently used menu functions. To do this, first specify which menu function you want to access using each individual button. Setting the Custom functions / Assigning the “Soft” buttons 2. in the submenu, select the relevant button FUNCTION 1 (=1.24), FUNCTION 2 (=1.23) or FUNCTION 3 (=1.21).
Inhalt_GB.qxp:Leica M8 deutsch 11.12.2009 10:24 Uhr Presets Basic settings for the camera Menu language By factory default, the language used for menu control is English, i.e. all menu items initially appear with their English names. German, French, Italian, Spanish, Russian, Japanese, Traditional and Simplified Chinese can all be selected as alternative menu languages. Setting the function 1. In the SETUP section of the menu (s. S. 13/22), select Language (5.34) 2.
Inhalt_GB.qxp:Leica M8 deutsch 11.12.2009 10:24 Uhr Seite 27 Signal tones On the LEICA S2, you can decide whether you want messages or autofocus mode (see p. 33) to be acknowledged by acoustic signals - two volume levels are available - or whether you prefer the camera to operate largely silently. A beep is used as an acknowledgement, and can be activated individually in autofocus mode to confirm that the setting has been made and to indicate a message.
Inhalt_GB.qxp:Leica M8 deutsch 11.12.2009 Basic picture settings 10:24 Uhr Seite 28 File format / Compression rate Two file formats are available for recording the picture data DNG and JPEG. You can select, whether your picture data a. is to be saved in only one of these formats, OR b. Simultaneously in both (i.e. two files are always created for each picture), AND c. in the case of JPEG format, which of two compression rates JPEG fine or JPEG standard - you want to use. Setting the function 1.
Inhalt_GB.qxp:Leica M8 deutsch 11.12.2009 10:24 Uhr Seite 29 White balance - Auto – For automatic control, which provides neutral results in most situations, - Seven fixed presets for the most frequent light sources, e.g. for outdoor pictures in sunshine, e.g. for outdoor pictures in cloudy conditions, e.g. for outdoor pictures with the main subject in shadow, e.g. for indoor pictures with (prevailing) incandescent light FIRMWARE e.g.
Inhalt_GB.qxp:Leica M8 deutsch 11.12.2009 10:24 Uhr Seite 30 ISO sensitivity The ISO setting on the LEICA S2 allows the shutter speed/aperture value to be adjusted to meet the requirements of the relevant situation, in six steps. The Pull 80 setting has an equivalent brightness to an ISO sensitivity of ISO 80. However, pictures taken with this setting have a lower contrast range. When using this sensitivity setting, it is important to make sure that important parts of the image are not overexposed.
Inhalt_GB.qxp:Leica M8 deutsch 11.12.2009 10:24 Uhr Seite 31 Image properties/Contrast, sharpness, color saturation All three image properties can be adjusted – independently – to three different levels using the menu control, so that you can set the optimum values for any situation, i.e. the prevailing lighting conditions. In the case of Color Saturation, Black/White can also be selected as a fourth option.
Inhalt_GB.qxp:Leica M8 deutsch 11.12.2009 10:24 Uhr Seite 32 Record mode Shutter release button The LEICA S2 has a three-stage shutter release button (1.1): 1. A brief tap activates the distance and exposure metering systems, as well as the displays in the viewfinder and the top panel. If the shutter release button is held at this pressure point, the metering systems and displays remain active.
Inhalt_GB.qxp:Leica M8 deutsch 11.12.2009 10:24 Uhr Seite 33 Setting the focus With all S lenses, the LEICA S2 allows you to choose between manual or automatic focusing. The autofocus system determines the distance to the parts of the subject in the center of the image field, which is marked by the cross-hair mark on the focusing screen. Regardless of the mode, the display (2.
Inhalt_GB.qxp:Leica M8 deutsch 11.12.2009 10:24 Uhr Seite 34 Exposure metering Exposure metering methods The LEICA S2 provides three different exposure metering methods: Setting the function 1. In the CAMERA section of the menu (see p. 13/22), select Exposure Metering (5.3) and 2. in the associated submenu, select the desired option. Spot metering - 1 For spot metering, only the metered value from the center field is used.
Inhalt_GB.qxp:Leica M8 deutsch 11.12.2009 10:24 Uhr Seite 35 Storing with button 1.17 Setting the function 4. In the SETUP section of the menu (see p. 13/22), select AE-/AF-Lock (5.30), and 5. then select one of the following options in the submenu: - AF-L (AF Lock) The shutter release button stores the exposure and autofocus setting. Holding down button 1.17 maintains storage of the autofocus setting even if you let go of the shutter release button.
Inhalt_GB.qxp:Leica M8 deutsch 11.12.2009 10:24 Uhr Seite 36 3. Confirm the setting by pressing the click wheel. • The setting for Interval is marked as ready for editing. The corresponding number of red arrows appears above the scale. They specify the relevant exposure values. 4. Set the desired graduation by turning the click wheel (20). • The arrows change their positions according to the set graduation.
Inhalt_GB.qxp:Leica M8 deutsch 11.12.2009 10:24 Uhr Seite 37 Exposure control Setting the shutter speed and aperture / Selecting the exposure mode On the LEICA S2, setting both - shutter speed and aperture values using manual pre-selection, - as well as the 3 automatic exposure modes is done with only 2 controls, the shutter speed setting dial (1.10) and the click wheel (1.18). Both the viewfinder (1.16/2) and the top panel display (1.
Inhalt_GB.qxp:Leica M8 deutsch 11.12.2009 10:24 Uhr Seite 38 Exposure modes The LEICA S2 provides you with a choice of four exposure modes. Programmed automatic exposure FIRMWARE Setting the mode UPDATE 1. Set the shutter speed dial (1.10) to A. 2. Press the click wheel (1.18) to set automatic exposure control, i.e. in this case automatic program mode.
Inhalt_GB.qxp:Leica M8 deutsch 11.12.2009 10:24 Uhr Seite 39 Shutter speed priority - T Setting the mode 1. Set the shutter speed dial (1.10) to the required value. 2. If necessary, press the click wheel (1.18) to set automatic FIRMWARE aperture control, i.e. in this case shutter speed priority mode. UPDATE The lens aperture is then controlled automatically based on the available light and continuously between a fully open and minimum aperture for the relevant lens.
Inhalt_GB.qxp:Leica M8 deutsch 11.12.2009 10:24 Uhr Taking photographs with the self-timer You can use the LEICA S2's self-timer function to take pictures with a delay of either 2 or 12 s. Setting / using the function 1. In the CAMERA section of the menu (see p. 13/22), select Drive Mode (5.1) and 2. select the required delay time in the associated submenu. 3. To start the process, press the shutter release button all the way down (see also "Shutter release button", p. 32).
Inhalt_GB.qxp:Leica M8 deutsch 11.12.2009 10:24 Uhr Seite 41 Depth of field preview button and depth of field You can use the depth of field preview button (1.4) on the LEICA S2 to close the open lens aperture for every exposure mode to the set or automatically determined aperture value. The correct values remain displayed in the monitor and the top panel display. However, the exposure meter is turned off. Prerequisites for stopping down: 1.
Inhalt_GB.qxp:Leica M8 deutsch 11.12.2009 10:24 Uhr Seite 42 Folder management The image data on the memory cards is stored in folders, which are created automatically. The folder names always consist of eight characters - three figures and five letters. In the factory default setting, the first folder is named „100LEICA“, the second „101LEICA“, etc. As a result, the camera can create a maximum of 999 folders. The LEICA S2 allows you to create new folders at any time and to specify their name yourself.
Inhalt_GB.qxp:Leica M8 deutsch 11.12.2009 10:24 Uhr Seite 43 Flash photography General information on flash exposure metering and control The LEICA S2 determines the required flash power by firing one or more ranging flashes in quick succession, fractions of a second before taking the actual picture. Immediately after this, at the start of exposure, the main flash is fired.
Inhalt_GB.qxp:Leica M8 deutsch 11.12.2009 10:24 Uhr Seite 44 Selecting the firing moment The LEICA S2 allows you to choose between the conventional flash firing moment at the beginning of the exposure and synchronization with the end of the exposure, i.e. immediately before the 2nd shutter curtain begins to close the image aperture again.
Inhalt_GB.qxp:Leica M8 deutsch 11.12.2009 10:24 Uhr Seite 45 Strobe flash mode with system compatible flash units This flash method, in which several flashes are emitted in succession during an exposure, is possible in all of the camera's exposure modes. In P and A modes, the camera automatically sets the necessary shutter speed for the selected flash number and frequency. If the required shutter speed results in overexposure due to the available light, this is indicated by the light balance (2.7).
Inhalt_GB.qxp:Leica M8 deutsch 11.12.2009 10:24 Uhr Seite 46 Review mode Selecting record and review modes After turning on, the LEICA S2 is always in record mode, i.e. the monitor (1.22) remains dark – once it is ready to use (see p. 21). To review the pictures, you can choose between two modes: - PLAY Review for an unlimited time - Auto Review. Brief review after taking the picture Review for unlimited time - PLAY Setting the function Select normal review mode by briefly pressing button 1.
Inhalt_GB.qxp:Leica M8 deutsch 11.12.2009 10:24 Uhr Seite 47 Normal review 4.1 The histogram The LEICA S2 allows you to choose between four histogram variations: Based on either the overall brightness or separately for the three primary colors red/green/blue, optionally with or without identification of the areas in the picture where no image appears (clipping), because they are too bright (red) or too dark (blue). Setting the function 1. In the SETUP section of the menu (see p.
Inhalt_GB.qxp:Leica M8 deutsch 11.12.2009 10:24 Uhr Seite 48 Viewing other pictures / „Scrolling“ in the memory Image review, zoom in Horizontal movement 1. In normal review mode (see above) press the click wheel (1.18). • The rectangle showing the zoom level and position (4.17) disappears. 2. You can then turn the click wheel to select the other pictures. Turning to the left takes you to the pictures with lower numbers, turning to the right to those with higher numbers.
Inhalt_GB.qxp:Leica M8 deutsch 11.12.2009 10:24 Uhr Seite 49 Retaining the zoom when „scrolling“ Simultaneously viewing several smaller pictures Switching to the other memory card When the Zoom Lock function is activated, the set zoom is retained when you view other pictures. Turning the click wheel (1.18) to the left - reduces the size of enlarged pictures, and turning beyond a 1:1 representation - allows simultaneous viewing of 4 or 9 pictures.
Inhalt_GB.qxp:Leica M8 deutsch 11.12.2009 10:24 Uhr Seite 50 Notes: • If protection or canceling protection for single pictures is active, other pictures can be called up by turning the click wheel (1.18). • The BACK button takes you back to step 2. • You can use button 1.23 to switch directly to the menu for canceling protection or to return from that menu. Protecting pictures / Clearing delete protection 1. In normal review mode (4.1) press any of the 4 buttons 1.20, 1.21, 1.23, or 1.24.
Inhalt_GB.qxp:Leica M8 deutsch 11.12.2009 10:24 Uhr Seite 51 Deleting pictures 1. In normal review mode (4.1) press any of the 4 buttons 1.20, 1.21, 1.23, or 1.24. • The image field shows -for 5s - the 4 fields 4.1.9 – MENU, 4.1.10 – INFO, 4.1.11 – PROTECT and 4.1.12 – DELETE for the button functions valid in this situation. 2. Press the Delete button. • The image field shows – the 4 fields 4.5.1 - All/Single, 4.5.2 - BACK, 4.5.3 – Protect and 4.5.4 – OK for the button functions valid in this situation.
Inhalt_GB.qxp:Leica M8 deutsch 11.12.2009 10:24 Uhr Seite 52 Additional functions Transferring data to a computer The LEICA S2 is compatible with the following operating systems: Microsoft®: Windows® XP / Vista® Apple® Macintosh®: Mac® OS X (10.5) The LEICA S2 is equipped with a USB 2.0 interface for transferring data to a computer. This allows fast data transfer to computers with the same kind of interface.
Inhalt_GB.qxp:Leica M8 deutsch 11.12.2009 10:24 Uhr Seite 53 Connecting and transferring data with the camera as an external drive (Mass Storage) With Windows® operating systems: If the LEICA S2 is connected to the computer using the USB cable, the operating system detects it as an external drive and assigns it a drive letter. Use Windows® Explorer to transfer/save the image data to your computer.
Inhalt_GB.qxp:Leica M8 deutsch 11.12.2009 10:24 Uhr Seite 54 Installing firmware updates HDMI slide show Leica is constantly working on developing and optimizing its products. As digital cameras have many functions that are controlled electronically, some of these improvements and enhancements to the functions can be installed on the camera at a later date.
Inhalt_GB.qxp:Leica M8 deutsch 11.12.2009 10:24 Uhr Seite 55 Miscellaneous System accessories Interchangeable lenses The range of interchangeable lenses in the Leica S system includes focal lengths from wide angle to telephoto, including a macro lens for close-up pictures, a zoom lens and a T(ilt) and S(hift) model for preventing falling lines or to precisely specify the depth of field progression.
Inhalt_GB.qxp:Leica M8 deutsch 11.12.2009 10:24 Uhr Precautions and care instructions Seite 56 General precautions • Do not use the LEICA S2 in the immediate vicinity of devices with powerful magnetic, electrostatic or electromagnetic fields (e.g. induction ovens, microwave ovens, television sets or computer monitors, video game consoles, cell phones, radio equipment). • If you place the LEICA S2 on or very close to a television set, its magnetic field could interfere with picture recordings.
Inhalt_GB.qxp:Leica M8 deutsch 11.12.2009 10:24 Uhr Seite 57 Condensation If condensation has formed on or in the LEICA S2, you should turn it off and leave it to stand at room temperature for around an hour. Once the camera temperature has adjusted to room temperature, the condensation will disappear by itself. Care instructions As any soiling also represents a growth medium for microorganisms, you should take care to keep the equipment clean.
Inhalt_GB.qxp:Leica M8 deutsch 11.12.2009 10:24 Uhr Seite 58 • Do not touch the connections on the memory card and keep them free of dirt, dust and moisture. • It is recommended that memory cards be reformatted from time to time, as fragmentation occurs when deleting, which can block some of the memory capacity. Cleaning the sensor If any dust or dirt particles should adhere to the sensor cover glass, depending on the size of the particles this can be identified by dark spots or marks on the pictures.
Inhalt_GB.qxp:Leica M8 deutsch 11.12.2009 10:24 Uhr Seite 59 Storage • If you will not be using the LEICA S2 for an extended period, we recommend that you a. turn it off (see p. 21), b. remove the memory cards (see p. 17), and c. remove the battery (see p. 17), (after a maximum of 3 months, the set time and date will be lost, see p. 26). • A lens works like a magnifying glass if bright sunlight shines on the front of the camera.
Inhalt_GB.qxp:Leica M8 deutsch Index 60 / Index 11.12.2009 10:24 Uhr Seite 60 Accessories....................................................................................55 Connection cords .......................................................................55 Flash units ..................................................................................55 Filters .........................................................................................55 Hand grip S2 .............................
Inhalt_GB.qxp:Leica M8 deutsch 11.12.2009 10:24 Uhr Seite 61 Focusing screens............................................................................55 Changing ....................................................................................19 Formatting the memory card ..........................................................42 HDMI .....................................................................................54/55 Histogram ..............................................................
Inhalt_GB.qxp:Leica M8 deutsch 11.12.
Inhalt_GB.qxp:Leica M8 deutsch 11.12.2009 10:24 Uhr Seite 63 Focusing Focus detection Using passive phase detection method Sensor / Metering field Central cross sensor, defined by cross hairs on ground glass screen Modes Choice of S(ingle) = sharpness priority, C(ontinuous) = shutter release priority, M(anual), manual override of automatic setting possible at any time Metering memory lock Pressing shutter release to pressure point, permanent storage with button 1.17 Drive In lenses Displays see p.
Inhalt_GB.qxp:Leica M8 deutsch 11.12.
Trademark of the Leica Camera Group/ Registered Trademark © 2009 Leica Camera AG
Leica Camera AG / Oskar-Barnack-Str. 11 / D-35606 Solms www.leica-camera.com / info@leica-camera.
LEICA S2 – Firmware Update 1.0.0.16 Update Characteristics Improvements Model, designation Leica S2 Update version 1.0.0.16 File name/-size FW_S2_1_0_0_16.S2 7.48 MB Update date 2010/22/04 Download location https://owners.leica-camera.com Version 1.0.0.16 Important: When updating firmware, you should never: - turn off the camera - remove the battery - remove the lens - remove the memory card. Description of Changes 1. Consistent, continuous image numbering 2.
Instructions for the installation of firmware Step 1: Check the version of the firmware currently installed Leica recommends updating your camera firmware when the installed version is an earlier version than the current update. 1. Turn the camera on. 2. Press the menu control button marked “SETUP” (1.21) and select the menu item “FIRMWARE” (5.35) with the click wheel (1.18) 3. Press the click wheel. The current firmware versions for the camera and lens are displayed. 4.
Step 3: Copy the firmware to a CF or SD memory card Step 4: Installing your firmware update Preparing the card (formatting): 1. Remove the card according to the instructions for your card reader, insert the card into the camera and close the cover. 2. Press and hold the AF/AE memory button (1.17) on the back of the camera, and turn the camera on. The update procedure will begin within a few seconds. You may now release the AF/AE memory button.
Detailed description of the changes 1. Consistent, continuous image numbering The camera automatically numbers new images sequentially. The numbering sequence is continued when a new or formatted memory card is inserted into the camera (following on from the highest previous image number). If the memory card already contains an image with a higher number, the numbering continues from this number on.
3. Improvement of data transfer speed for computertethered photography The speed of the saving and transfer procedure for tethered photography has been increased. 4. Simplified image review operation A short press of button 1.20 (upper right-hand button next to monitor) calls up normal review mode. You can begin to scroll through the images with the click wheel as soon as an image is displayed on the monitor. Press the click wheel to enter the zoom mode (enlarged image segment). 5.
6. Increased functional reliability when changing exposure modes The exposure modes (program, shutter priority, aperture priority, and manual modes) can be selected by a combination of rotating the shutter speed dial and pressing the click wheel (please refer to the camera instructions, pages 38–39). The operational mode of the click wheel can be adjusted in the camera menu to prevent accidental changing of the exposure mode.
9. Additional functions The camera now has the following additional functions: 9.1 Additional white balance preset HMI (Hydrargym Medium Arc Length Iodide) The additional white balance preset, HMI, has been added. 9.2 Additional viewfinder information: exposure compensation Exposure compensation values are now indicated in the viewfinder’s light balance. Example: Exposure compensation +1.5 EV Firmware Update 1.0.0.
9.3 Custom settings for depth of field preview button For particularly fast handling, the functions of the buttons 1.21, 1.23, 1.24, and 1.3 can be customized to provide immediate access to your most important or frequently needed menu functions. To do so, the buttons are first customized by defining which of the menus’ functional groups should be called up with the quick access function. From now on, the function of the depth of field preview button 1.3 can also be customized as desired.
9.6 Extended custom functions For particularly fast handling, the functions of the buttons 1.21, 1.23, 1.24, and 1.3 can be customized to provide immediate access to your most important or frequently needed menu functions. 10. Improved lens performance Lens performance has been improved further. 11. Automatic detection of interchangeable focusing screen types Interchangeable focusing screen types (e.g. ground glass with grid) are detected automatically.
LEICA S2 Firmware Update 1.0.0.17 Update Characteristics Improvements Model, designation Leica S2 Update version 1.0.0.17 File name/size FW_S2_1_0_0_17.S2 / 7,9 MB Update date 2010/16/9 Download location https://owners.leica-camera.com Version FW S2 1.0.0.17 Description of Changes Support of the new Leica lens: Leica Apo-Macro-Summarit-S 1:2,5/120mm ASPH. Important: When updating firmware, you should never: - turn off the camera - remove the battery - remove the lens - remove the memory card.
LEICA S2 Firmware Update 1.0.0.24 Update Characteristics Improvements Model, designation Leica S2 Update version 1.0.0.24 File name/size FW_S2_1_0_0_24.S2 / 7,48 MB Update date 2010/17/12 Download location https://owners.leica-camera.com Version FW S2 1.0.0.24 Description of Changes 1. Extending the memory card compatibility 64GB (UDMA6) 2. Lossless DNG Compression 3. Clipping Definition 4. Improvement in histogram for automatic picture preview 5. Extension of exposure time to 125s 6.
S2 Firmware Update 1.0.0.24 Detailed description of changes 1. Extending the memory card compatibility The memory card compatibility has been extended to 64GB (UDMA6). 2. Lossless DNG compression DNG (digital negative) can now be compressed lossless in line with the DNG standard. Compressed DNG has the following advantages: - Reduction in file size from approx. 75MB approx.
3. Clipping Definition The light and shade warning can now be defined. This provides direct control in terms of the pre-printing stage settings 4. Improvement in histogram for automatic picture review The histogram display for automatic picture review has been enlarged to improve legibility. 5. Extension of exposure time to 125s Long-time exposure - the maximum exposure time has been extended from 32s to 125s.
6. Shutter speed pre-selection in BULB mode In BULB exposure mode (B), the extended menu can be called up by pressing the click wheel. The difference exposure times can be directly preselected by turning the click wheel. The click wheel has to be pressed again to confirm the selection. The set exposure time then appears in the OLED display. 7. Extension of setting options for AF/AE lock button The functioning of the AF/AE lock button (1.17) can now be changed.
AF mode In AF mode, the AF/AE lock button can be assigned the following functions: AF-L AE-L AF-L on / AE-L - Autofocus lock (AFs / AFc) - Exposure value lock - Autofocus (AFs / AFc) and exposure value lock 8. Optimization of AF performance - dynamic AF metering field width We have been able to further increase the metering accuracy of the autofocus function. In particular, very small image details can now be focused better. The metering point is located at the center of the viewfinder cross.
LEICA S2 Firmware Update 1.0.1.8 Update Characteristics Improvements Model, designation Leica S2 Update version 1.0.1.8 File name/size FW_S2_1_0_1_8.S2 / 7,48 MB Update date 2011/28/07 Download location https://owners.leica-camera.com Version FW S2 1.0.1.8 Description of Changes 1. Automatic Bracketing Function 2.
Detailed description of changes 2 / Firmware Update 1.0.1.8 1. Automatic Bracketing Function now you can choose whether you make all bracketing exposures by pressing the shutter release button only once or the traditional way by taking picture by picture. This feature is very helpful if you use the pictures for HDR processing afterwards. 2. Custom Functions Now an additional button (upper right side) is ready to custom function.
LEICA S2 Firmware Update 1.0.2.0 Update Characteristics Improvements Model, designation Leica S2 Update version 1.0.2.0 File name/size FW_S2_1_0_2_0.S2 / 7,9 MB Update date 2011/20/12 Download location https://owners.leica-camera.com Version FW S2 1.0.2.0 Description of Changes Support of the new Leica lens: LEICA ELMARIT-S 2.8/30mm ASPH. Important: When updating firmware, you should never: - turn off the camera - remove the battery - remove the lens - remove the memory card.
LEICA S2 Firmware Update 1.0.3.3 Update Characteristics Improvements Model, designation Leica S2 Update version 1.0.3.3 File name/size FW_S2_1_0_3_3.S2 / 7.5 MB Update date 2012/10/5 Download location https://owners.leica-camera.com Version FW S2 1.0.3.3 Description of Changes - Support of the new Hasselblad lens adapter Leica S-Adapter H –full functionality (order no.
