Operation Manual
2 / Firmware Update 1.0.0.16
Instructions for the installation of
rmware
Step 1:
Check the version of the rmware currently installed
Leica recommends updating your camera rmware when the
installed version is an earlier version than the current update.
1. Turn the camera on.
2. Press the menu control button marked “SETUP” (1.21) and
select the menu item “FIRMWARE” (5.35) with the click
wheel (1.18)
3. Press the click wheel. The current rmware versions for the
camera and lens are displayed.
4. After rmware installation, the camera rmware version
should be displayed as follows:
Camera S2
Version number 1.0.0.16
Step 2: Downloading the latest rmware
1. Download and save the le FW_S2_1_0_0_16.S2 7.48 to
your computer/desktop.
2. Check the le size. Repeat the download if the size is die-
rent from the le size indicated above.