Operating Instructions

EN
176
Picture mode
Using external fl ash units Fig. 52
The ISO fl ash shoe on the Leica T allows you to use more powerful
external  ash units. We particularly recommend using Leica  ash
units.
Fig. 52
Attaching the fl ash unit
► Turn off the camera and the fl ash unit.
► Slide back the cover that protects the fl ash shoe on the camera
when not in use.
► When attaching, make sure that the foot is fully inserted into the
fl ash shoe and, if available, secured against falling out with the
clamping nut. This is important because changes of position in
the fl ash shoe can break the required contacts, causing
malfunctions.
As soon as an external  ash unit is attached, the speci ed  ash
modes with pre-fl ash function (
/ / ) are switched to the
otherwise identical modes without pre-fl ash (
/ / ) and
displayed accordingly. However, when the fl ash unit is removed the
camera reverts to the set mode.