Operation Manual

Advanced (Recording pictures)
- 78 -
[REC] Mode:
Exposure Compensation
Use this function to adjust the exposure to the important part of the subject in case of large
differences in brightness within the frame. Look at the following examples.
∫ Operate with the rear dial
1 Press the rear dial to select [È], and then rotate
the rear dial to compensate the exposure.
A Exposure compensation value
2 Press the shutter button halfway to finish.
Note
•
EV is an abbreviation of [Exposure Value].
• The exposure compensation value appears on the lower left of the screen.
• The set exposure value is memorized even if the camera is turned off.
• The compensation range of the exposure will be limited depending on the brightness of the
subject.
• Exposure compensation cannot be used when in [STARRY SKY] in Scene Mode.
Under exposed Properly exposed Overexposed
Compensate the exposure
towards positive.
Compensate the
exposure towards
negative.
Press 3 [È] until [EXPOSURE] appears,
compensate the exposure with 2/1.
• Select [0 EV] to return to the original exposure.
Press [MENU/SET] to finish.
• You can also press the shutter button halfway to finish.