Specifications

- 72 -
Recording
Using the Built-In Flash
Applicable modes:
∫ To open/close the flash unit
A To open the flash unit
Push the flash release slider in the direction
indicated by the arrow.
B To close the flash unit
Push the flash unit down until it clicks into
place.
Notes
• Be sure to close the flash when it is not in use.
• The flash setting is fixed to [Œ] while the flash is
closed.
• Be careful not to pinch your fingers when you close the flash.
• Be sure to keep the flash unit clean, clear of dust and avoid exposure to anything sticky. This may
cause it to stick and not open.
• You should not close the flash unit by pushing the microphone section or its periphery. Forcibly
closing the flash can damage the camera.