Operation Manual

- 141 -
Reducing the time required for positioning
Using the “GPS Assist Tool”
■
Using “GPS Assist Tool” by connecting the camera and computer
Preparation: Turn on the computer and close all other open application programs.
Press [MENU/SET]
Use the respective cursor buttons to select [GPS] menu and
press [MENU/SET]
Use the respective cursor buttons to select [Assist Data] and
press [MENU/SET]
Use the respective cursor buttons to select [Update] and
press [MENU/SET]
Use the respective cursor buttons to select [Connect USB]
and press [MENU/SET]
Connect the camera to a computer
Make sure the plug is aligned correctly
and that it is inserted straight.
(Otherwise the connectors may be bent
out of shape which will cause trouble.)
[Access] (sending data)
• Do not disconnect
the USB connection
cable while [Access] is
displayed.
USB connection cable
(always use the supplied cable)
Start up the “GPS Assist Tool” on your computer and update
the GPS assist data (→143)
The GPS assist data of the camera is updated.
Terminate the connection between the camera and computer
and disconnect the USB connection cable
●
You can also update the assist data if you select [GPS assist data] for [USB Mode] (→58)
when you connect the camera to a computer.
●
Do not use any other USB connection cables except the supplied one.