Operation Manual

- 166 -
Printing
Preparation:
• Charge the battery sufficiently.
• When printing pictures from the
built-in memory, remove any memory
cards.
• Adjust the print quality or other
settings on your printer, as needed.
• Turn on the camera and the printer.
Connect the camera to the printer
• Please make sure you use the supplied USB connection cable. Use of cables
other than the supplied USB connection cable may cause malfunction.
Use the respective cursor buttons on the camera to select
[PictBridge(PTP)], and press [MENU/SET]
Use the respective cursor buttons to select a picture to print
and press [MENU/SET]
Use the respective cursor buttons to select [Print start] and
press [MENU/SET] (Print settings (→169))
■
To cancel print Press [MENU/SET].
Make sure the plug is aligned correctly and that it
is inserted straight.
(Otherwise the connectors may be bent out of
shape which will cause trouble.)
• Do not disconnect the USB connection cable
when the cable disconnection icon
is displayed
(it may not be displayed with some printers).
USB connection cable
(always use the supplied cable)
You can connect directly to a PictBridge-compatible printer for printing.
• Some printers can print directly from the camera’s memory card.
For details, see the instructions for your printer.