Operation Manual
- 87 -
Taking picture series
Recording modes:
Series of consecutive pictures can be taken by keeping the shutter button fully pressed.
Select [Burst] from the [Rec] menu (→51)
Use the respective cursor buttons to select the exposure
series setting, and press [MENU/SET]
Setting Frame rate Description
No. of
pictures
∗
1
Approx. 2 - 10
pictures/sec.
• The frame rate is adjusted automatically in
accordance with the movements of people, pets
or other subjects. ([Intelligent Burst mode])
• When a fast-moving subject is recorded, the
frame rate becomes faster and the number
of pictures that can be recorded in a series is
restricted to about 10.
100
∗
2
Approx. 2
pictures/sec.
• The subject is focused as well as it is possible
during the intervals between the exposures.
The exposure and white balance settings are
controlled for every picture in the series.
(However, when an exposure series is started
during motion picture recording, the focus is
fixed to the first picture.)
• The frame rate may be reduced under certain
recording conditions.
100
∗
2
Approx. 5
pictures/sec.
Approx. 10
pictures/sec.
• Focus, exposure and White Balance are fixed
to the settings for the first picture.
10
40 pictures/sec.
• Focus, exposure and White Balance are fixed
to the settings for the first picture.
• Consider the resolution setting (→88)
40
60 pictures/sec.
• Focus, exposure and White Balance are fixed
to the settings for the first picture.
• The recordable range is reduced.
• Consider the resolution setting (→88)
60
∗
3
Complies with
recording
conditions
• Exposure series can be recorded even in low
light conditions as the flash is used. ([Flash
Burst])
• The focus, exposure, and flash level are all
fixed to the settings for the first picture.
• Consider the resolution setting (→88)
5
[OFF] — The series exposure function is canceled. —
∗
1
Only in the mode
∗
2
The number of serially recorded pictures are limited by the picture-taking conditions and the
type and/or status of the card used.
∗
3
Only in the , , modes