Operation Manual

- 88 -
Taking picture series
Possible resolution settings
[Aspect Ratio]
4:3 5 M, 3 M, 0.3 M 2.5 M, 0.3 M 3 M
3:2 4.5 M, 2.5 M, 0.3 M 3 M, 0.3 M 2.5 M
16:9 3.5 M, 2 M, 0.2 M 3.5 M, 0.2 M 2 M
1:1 3.5 M, 2.5 M, 0.2 M 2 M, 0.2 M 2.5 M
Pictures taken with the or setting are recorded together as a group (exposure
series group). (109)
Depending on changes in the brightness of the subject, the second and subsequent
pictures may be recorded brighter or darker when using the exposure series function at
the , , or setting.
The frame rate may be reduced if the shutter speed is reduced in darker locations.
The pictures taken using the exposure series function at the or setting may be
distorted if the subjects were moving or the camera was moved.
[Auto Bracket] is deactivated.
The flash is set to [Forced Flash Off]. (However, when [Flash Burst] is selected,
the flash is fixed to [Forced Flash On].)
Settings will be stored even if power is turned off.
The exposure series function cannot be used in the following cases:
• With [Creative Control] modes ([Toy Effect] [Miniature Effect] [Soft Focus])
• With Scene Modes ([Panorama Shot] [Handheld Night Shot] [HDR] [High Speed
Video])
When the scene mode is set to [Night Portrait], [Night Scenery] or [High Sens.], or
cannot be selected.
When [Selftimer] is set, 3 pictures are taken. (When [Flash Burst] is set, 5 pictures are
taken.)
It may take a while to store still pictures that were taken using the exposure series
function.
Zooming is not possible during an exposure series recording.