Instruction Manual

4. Recording Modes
120
Registering your preferred settings (Custom Mode)
Recording modes:
You can register the current camera settings as custom settings.
If you then record using one of the Custom Modes, you can use the registered settings.
•
Initial setting of the Program Mode is registered as the custom settings initially.
To allow recording using the same settings, up to 4 sets of current camera settings can be
registered using [Cust.Set Mem.]. (
, , , )
1
Select the menu.
2
Press 3/4 to select the custom set to register and then
[MENU/SET].
• A confirmation screen is displayed. The respective function is executed when [Yes] is
selected.
Exit the menu after it is executed.
• The following menu items cannot be registered as custom settings.
Registering Personal Menu Settings
Preparations: Set the recording mode you wish to save first, and then select the desired
menu settings on the camera.
> [Custom] > [Cust.Set Mem.]
The settings are registered for on the mode dial.
• You can record using by simply rotating the mode dial to the
corresponding position. If you register the custom settings you
use often, it is then convenient to use them.
The settings are registered for on the mode dial.
• You can register up to 3 sets of custom settings and use the
different sets as conditions demand.
[Rec] menu [Setup] menu [Custom] menu [Playback] menu
– Data registered with
[Face Recog.]
– The [Profile Setup]
setting
– All menus – [Menu Guide] – [Rotate Disp.]
– [Picture Sort]
– [Delete
Confirmation]
MENU