Instruction Manual

5. Image and Picture Quality Settings

128

This mode allows metering any specific situation and storing the according White Balance

setting.

1 Press 1 [ ].

2 Rotate the rear dial to select [ ], [ ], [ ], or [ ], and then press 3.

3 Aim the camera at a sheet of white paper etc. so that

it fills the frame in the center completely and then

press [MENU/SET].

•

It may not be possible to set the White Balance when the subject is too bright or too dark. Set it

again after adjusting the exposure to appropriate brightness.

You can set the color temperature manually for taking natural pictures in different lighting

conditions.

The color of light is measured as a number in degrees Kelvin. As the color temperature

increases, the picture becomes more bluish. As the color temperature decreases, the

picture becomes more reddish.

1 Press 1 [ ].

2 Rotate the rear dial to select [ ], and then press

3 Press 3/4 to select the color temperature and then

[MENU/SET].

•

You can set a color temperature from [2500K] to [10000K].

Setting the White Balance manually

Setting the color temperature

6500K