Instruction Manual

163

6. Focus and Exposure Settings

Available in the following modes:

This function allows limiting the ISO range utilized by Auto ISO, e.g. to determine the

accepted amount of noise.

Settings: [200]/[400]/[800]/[1600]/[3200]/[6400]/[12500]/[OFF]

•

The function will work when the [Sensitivity] is set to [AUTO] or [ ].

[ISO Limit Set] is disabled in the following cases:

– [Clear Nightscape]/[Cool Night Sky]/[Warm Glowing Nightscape]/[Handheld Night Shot]

(Scene Guide Mode)

– When recording motion pictures

Available in the following modes:

You can determine whether to set the ISO values in 1EV or 1/3EV steps.

¢ Only available when [Extended ISO] is set.

• When the setting is changed from [1/3 EV] to [1 EV], [Sensitivity] will be set to value closest to

the value set with [1/3 EV].

Available in the following modes:

This mode allows setting the ISO sensitivity up to [25000]

Settings: [ON]/[OFF]

Setting the upper ISO sensitivity limit

> [Rec] > [ISO Limit Set]

Setting the ISO sensitivity setting increments

> [Rec] > [ISO Increments]

[1/3 EV]

[L.80]

/[L.100]

/[125]/[160 ]/[200]/[250]/[320]/[400]/[500]/[640]/[800 ]/[1000]/

[1250]/[1600]/[2000]/[2500]/[3200]/[4000]/[5000]/[6400]/[8000]/[10000]/[12500]/

[H.16000]

/[H.20000]

/[H.25000]

[1 EV] [L.80]

/[L.100]

/[125]/[200]/[400]/[800]/[1600]/[3200]/[6400]/[12500]/[H.25000]

Extending ISO sensitivity

> [Rec] > [Extended ISO]