Instruction Manual

7. Shutter and Drive Settings
172
∫ Changing the settings for [Single/Burst Settings], [Step] and [Sequence] in Auto
Bracket
1 Select the menu.
2 Press 3/4 to select [Single/Burst Settings], [Step] or [Sequence] and then
MENU/SET].
3 Press 3/4 to select the setting and then [MENU/SET].
•
You can take one picture at a time when set to [ ].
• You can continuously take pictures up to set numbers when set to [ ].
• Exit the menu after it is set.
• When taking pictures using Auto Bracket after setting an Exposure Compensation value, the
pictures taken are based on the selected Exposure Compensation value.
Auto Bracket is disabled in the following cases.
– [Glistening Water]/[Glittering Illuminations]/[Handheld Night Shot]/[Soft Image of a Flower]/
[Panorama Shot] (Scene Guide Mode)
– [Rough Monochrome]/[Silky Monochrome]/[Miniature Effect]/[Soft Focus]/[Star Filter]/
[Sunshine] (Creative Control Mode)
– When White Balance Bracket is set.
– When recording motion pictures
– When recording using the flash
– When recording with [iHandheld Night Shot]
– When [HDR] is set to [ON]
– [Multi Exp.]
> [Rec] > [Auto Bracket]
[Single/Burst
Settings]
[ ] (single)
[Sequence]
[0/`/_]
[ ] (continuous) [`/0/_]
[Step]
[3•1/3] (3 pictures)
[3•2/3] (3 pictures)
[3•1] (3 pictures)
[5•1/3] (5 pictures)
[5•2/3] (5 pictures)
[5•1] (5 pictures)
[7•1/3] (7 pictures)
[7•2/3] (7 pictures)
[7•1] (7 pictures)
MENU