Instruction Manual

7. Shutter and Drive Settings
176
8 Press the shutter button fully.
•
The recording starts automatically.
• During recording standby, the power will turn off automatically if no operation is performed
for a certain period. The Time Lapse Shot is continued even with the power turned off.
When the recording start time arrives, the power turns on automatically.
To turn on the power manually, press the shutter button halfway.
• If [FN2] is pressed while the camera is turned on, a selection screen asking you to pause
or end will be displayed. Operate in accordance with the screen. Also, if [FN2] is pressed
during the pause, a selection screen asking you to resume or end will be displayed.
Pressing the shutter button fully will also enable you to resume from the pause.
• A confirmation screen for creating a motion picture is displayed next, so select [Yes].
9 Select the methods for creating a motion picture.
10 Select [OK] with 3/4, and then press [MENU/SET].
•
A confirmation screen is displayed. It is executed when
[Yes] is selected.
• Motion pictures can also be created from [Time Lapse
Video] in the [Playback] menu. (P235)
[Rec Quality]
For setting the quality of a motion picture.
• With camera models 18 194 / 18 195:
[4K/30p]/[FHD/60p]/[FHD/30p]/[HD/30p]/[VGA/30p]
• With camera models 18 193 / 18 196:
[4K/25p]/[FHD/50p]/[FHD/25p]/[HD/25p]/[VGA/25p]
[Frame Rate]
For setting the number of frames per second.
The higher the frame rate is, the smoother the motion picture will
be.
• With camera models 18 194 / 18 195:
[60fps]
¢
/[30fps]/[15fps]/[10fps]/[7.5fps]/[6fps]/[3fps]/[1fps]
¢ Only when set to [FHD/60p]
• With camera models 18 193 / 18 196:
[50fps]
¢
/[25fps]/[12.5fps]/[8.3fps]/[6.25fps]/[5fps]/[2.5fps]/
[1fps]
¢ Only when set to [FHD/50p]
[Sequence]
[NORMAL]:
Splices pictures together in recording order.
[REVERSE]:
Splices pictures together in reverse recording order.