Instruction Manual

205

9. Stabilizer, Zoom and Flash

Available in the following modes:

You can adjust the flash exposure to compensate for pictures in which the parts mainly

illuminated by the flash would otherwise appear too dark or bright.

1 Select the menu.

2 Press 3/4 to select [Flash Adjust.] and then [MENU/SET].

3 Press 2/1 to set the flash output and then [MENU/SET].

•

You can set from [j3 EV] to [i3 EV] in steps of 1/3 EV.

• Select [n0] to return to the original flash output.

• [i] or [j] is displayed on the flash icon in the screen when the flash level is adjusted.

• The [Flash Adjust.] setting also applies to an external flash unit. (P290)

Available in the following modes:

When [Auto Exposure Comp.] in [Flash] in the [Rec] menu is set to [ON], the brightness of

the built-in flash will automatically be set to the level appropriate to the selected Exposure

Compensation.

•

For details on Exposure Compensation, refer to P160.

• The [Auto Exposure Comp.] setting also applies to an external flash unit. (P290)

Flash exposure compensation

> [Rec] > [Flash]

Synchronizing the output of the built-in flash unit to the set Exposure

Compensation