Instruction Manual

2. Preparations before Recording
22
Attaching the Lens Cap/the Shoulder Strap
∫ Attaching the Lens Cap
•
When the camera is not being used, always attach the lens cap to protect the lens.
1
Pass the string through the strap lug on the
camera.
2
Pass the other
end of the string
through the
eyelet on the
lens cap.
3
Attach the lens cap.
• Do not hang or swing around the camera holding it
only by the lens cap string.
• Make sure to remove the lens cap before turning
the camera on.
• Take care not to entangle the lens cap string with
the shoulder strap.
∫ Attaching the Shoulder Strap
•
We recommend attaching the shoulder strap when using the camera to prevent it from
dropping.
1
Pass one end of the shoulder strap through the
shoulder strap lug.
2
Pass the shoulder strap through the stopper
and pull it tight.
A Let the end of the strap extend 2cm (
25
/
32
q) or more.
• Attach the shoulder strap to the other side of the camera
without twisting it.
A