Instruction Manual

11. Playing Back and Editing Images
234
Recorded motion pictures can be divided in two. This is recommended for when you want
to separate a part you need from one you do not need.
Dividing a motion picture is permanent. Decide before you divide!
1 Select the menu.
2 Press 2/1 to select the motion picture to divide, and then [MENU/SET].
•
Avoid trying to divide motion picture near the very beginning or end of the motion picture.
• You cannot use [Video Divide] for the following pictures.
– Motion pictures with a short recording time
[Video Divide]
> [Playback] > [Video Divide]
3 Press 3 at the location to divide.
•
The motion picture is played back from the same location
when 3 is pressed again.
• You can finely adjust the location for division by pressing
2/1 while the motion picture is paused.
4 Press 4.
•
A confirmation screen is displayed. It is executed when [Yes] is selected.
Exit the menu after it is executed.
• A motion picture may be lost if the card or battery is removed while processing the
dividing.
MENU