Instruction Manual

2. Preparations before Recording
24
∫ About the [CHARGE] indicator
•
When the [CHARGE] indicator flashes
– The battery temperature is too high or too low. It is recommended to charge the battery again
in an ambient temperature of between 10 - 30oC (50 - 86oF).
– The terminals of the charger or the battery are dirty. In this case, clean them with a dry cloth.
∫ Charging time
•
The indicated charging time is for when the battery has been discharged completely.
The charging time may vary depending on how the battery has been used.
The charging time for the battery in hot/cold environments or for a battery that has not
been used for a long time may be longer than normal.
∫ Battery indication
•
The indication turns red and flashes if the remaining battery power is exhausted.
(The status indicator also flashes)
Recharge the battery or replace it with a fully charged battery.
• Do not leave any metal items (such as clips) near the power plug terminals.
Otherwise, a fire and/or electric shocks may be caused by short-circuiting or the
resulting generated heat.
• The battery can be recharged even when it still has some charge left, but it is not
recommended that the battery charge be frequently topped up while the battery is fully
charged.
(Since characteristic swelling may occur.)
On: Charging.
Off: Charging has been completed.
(After charging is completed, disconnect the charger from the electrical
outlet and remove the battery from the charger.)
Charging time Approx. 140 min
98
AFSAFS
L
3:2