Instruction Manual

12. Using the Wi-Fi function
246
∫ This camera is compatible with NFC
Using the NFC “Near Field Communication” function, you
can easily transfer data necessary for a Wi-Fi connection
between this camera and the smartphone.
∫ About the Wi-Fi connection lamp
∫ About the [WIFI] button
Pressing and holding [WIFI] before connecting to Wi-Fi
(When connecting to a smartphone)
•
The information required for connecting the smartphone to the
camera (QR code, SSID and password) is displayed. (P251)
Pressing [WIFI] before connecting to Wi-Fi
•
Following items can be selected.
• These instructions describe the procedure for [New Connection].
Compatible models
This function can be used with the NFC compatible device with Android (OS version
2.3.3 or higher). (excluding some models)
•
For information on the operation and settings of NFC-compatible smartphones, refer to the
operating instructions of your device.
Lit blue: The Wi-Fi connection is on standby
Flashing blue: Sending/receiving data through the Wi-Fi
connection
[WIFI]/[FN2] button can be used in two ways, as [Wi-Fi] or
as [Fn2] (function 2).
At the time of purchase, it is initially set to [Wi-Fi].
•
Refer to P43 for details about the function button.
[New Connection]
[Select a destination from
History] (P268)
[Select a destination from
Favorite] (P268)
ョワビ