Instruction Manual

12. Using the Wi-Fi function

252

If you are using an iOS device

When scanning the QR code to set up a connection

(If you are reconnecting the camera, steps 1 to 5 are not required)

1 Start “Image Shuttle”. (P250)

2 Select [QR code], and then [OK].

3 Using “Image Shuttle”, scan the QR code

displayed on the screen of the camera.

•

If you press [MENU/SET] on the camera, the QR

code will be enlarged. When it is difficult to scan

the QR code, try enlarging it.

(If the scanning is not successful, move the

camera and the smartphone further away from

each other and try again or use a connection method other than the QR code

method.)

4 Install the profile of “Image Shuttle”.

•

A message will be displayed on the browser.

• If the smartphone is locked with a passcode, enter the

passcode to unlock the smartphone.

5 Press the home button to close the browser.

6 Turn on the Wi-Fi function in the setting menu of the smartphone.

7 Select the SSID displayed on the screen of the

camera.

8 Return to the home screen, and then start “Image

Shuttle”. (P250)

IMAGE SHUTTLE

Leica Camera AG

Wi-Fi

0123456789ABC

Wi-Fi

0123456789ABC