Instruction Manual

253
12. Using the Wi-Fi function
When using an SSID and password to set up a connection
1 Turn on the Wi-Fi function in the setting menu of the smartphone.
2 Select the SSID displayed on the screen of the
camera.
3 Enter the password displayed on the screen of the
camera.
(Only when connecting for the first time)
4 Start “Image Shuttle”. (P250)
If you are using an Android device
When scanning the QR code to set up a connection
1 Start “Image Shuttle”. (P250)
2 Select [QR code].
3 Using “Image Shuttle”, scan the QR code
displayed on the screen of the camera.
•
If you press [MENU/SET] on the camera, the QR
code will be enlarged. When it is difficult to scan
the QR code, try enlarging it.
(If the scanning is not successful, move the
camera and the smartphone further away from
each other and try again or use a connection
method other than the QR code method.)
When using an SSID and password to set up a connection
1 Start “Image Shuttle”. (P250)
2 Select [Wi-Fi].
3 Select the SSID displayed on the screen of the
camera.
4 Enter the password displayed on the screen of
the camera.
(Only when connecting for the first time)
•
If you mark the box that enables the smartphone to display the password, you
can see the password as you enter it.
Wi-Fi
0123456789ABC