Instruction Manual

12. Using the Wi-Fi function
256
• You can register up to 20 smartphones. When the number exceeds 20, registrations will be
deleted, starting from the oldest touched one.
• Performing [Reset Wi-Fi Settings] will delete the smartphone registration.
• If the camera is not recognized even when touching the smartphone, change positions and try
again.
• Touch, but do not press the smartphone to this camera strongly.
• For information on the operation and settings of NFC-compatible smartphones, refer to the
instructions of your device.
• If there is a metal object between this camera and the smartphone, reading may fail. Also,
putting a sticker around the NFC area may deteriorate the communication performance.
• This function is not available in the following cases:
– When connecting to a computer or a printer
– When recording motion pictures
– When using [Time Lapse Shot]
– [Multi Exp.]
1 Connect to a smartphone. (P251)
2 Operate the smartphone.
Taking pictures via a smartphone/tablet (remote recording)
1 Select [ ].
2 Record an image.
•
The recorded images are saved in the camera.
• Some settings are not available.
A

