Instruction Manual

12. Using the Wi-Fi function
258
A Wi-Fi connection using NFC function is possible by touching the smartphone to the
camera, and you can easily transfer images displayed on the screen.
An image can be sent on site immediately after taking it, so you can easily send it to the
smartphone
¢
of your family or friend.
¢ Installing the “Image Shuttle” is required for use.
1 Play back the picture in the camera.
2 Launch “Image Shuttle” on the smartphone.
3 While [ ] is displayed on the connection
screen of the “Image Shuttle”, touch the
smartphone to A of the camera.
•
It may take time to complete the connection.
• If a connection attempt by touching fails, restart
the “Image Shuttle”, and then display the
screen in step
2 again.
• To transfer more than one image, repeat steps
1 and 3.
(They cannot be transferred as a batch.)
• Depending on the environment you are using, it may take a few minutes to complete the image
transfer.
• You do not need to keep the devices in contact with each other while an image is being
transferred. Do not put the camera down on top of the lens
.
Transferring images stored in the camera easily
Preparation:
(On the camera)
•
Set [NFC Operation] to [ON]. (P272)
• Set [Touch Sharing] to [ON]. (P272)
(On your smartphone)
•
Check that your smartphone is a compatible
model.
• Turn on the Wi-Fi function.
• Install the “Image Shuttle” in advance.
(P250)
