Instruction Manual

12. Using the Wi-Fi function

272

[Wi-Fi Setup] Menu

This menu allows configuring the settings required for the Wi-Fi function.

The settings cannot be changed when connected to Wi-Fi.

Select the menu.

> [Setup] > [Wi-Fi] > [Wi-Fi Setup] > Desired item to be set

[Device Name]

You can change the name of the camera.

1 Press [DISP].

2 Enter the desired device name.

•

For details on how to enter characters, refer to “Entering Text”

section on P54.

• A maximum of 32 characters can be entered.

[NFC Operation]

Configures the settings for the NFC function.

[ON]:

NFC function is worked.

[OFF]

[Touch Sharing]

Sets the camera operation after the connection with the NFC

function is complete.

[ON]:

When a Wi-Fi connection is complete by using the NFC function

during single picture playback, the single picture can be

transferred.

[OFF]