Instruction Manual

13. Connecting to other equipment
276
2
Turn on the TV and select the input to match the connection in use.
3
Turn the camera on and then press [(].
• The input of the TV will switch automatically and the playback screen is displayed when
connected to a HDTV Link compatible TV using an HDMI micro cable with [HDTV Link]
(P52) set to [ON]. (P278)
• Depending on the [Aspect Ratio], black bands may be displayed on the top and bottom or the
left and right of the pictures.
• Change the screen mode on your TV if the picture is displayed with the top or bottom cut off.
• Output from the HDMI micro cable has priority when both an AV and an HDMI micro cable are
connected.
• The connection with the USB connection cable (supplied) will take priority when there is a
simultaneous connection
with the HDMI micro cable.
• When you play back a picture vertically, it may be blurry.
• Proper playback will be dependent on the TV used for viewing.
• You can view pictures on TVs in other countries (regions) which use the NTSC or PAL system
when you set [Video Out] in the [Setup] menu. (With camera models 18 193 / 18 196)
• No sound is output from the camera speakers.
• Read the instructions for the TV.
To connect with an AV cable
•
Use only AV cables that comply with the respective standards.
• Check the [TV Aspect]. (P51)
• Audio will be played back in monaural.
• The viewfinder will not operate when connected with an AV cable.
A Align the marks, and insert.
B AV cable
C [AV OUT/DIGITAL] terminal
• The color of the terminal is gold.
D Yellow: to the video input socket
E White: to the audio input socket
