Instruction Manual

279
13. Connecting to other equipment
∫ Other linked operations
Turning the camera off:
If you use the remote control for the TV to turn the TV off, the camera is also turned off.
Automatic input switching:
•
If you connect with an HDMI micro cable, then turn the camera on, and then press [(], the
input channel on the TV automatically switches to the camera’s screen. If the TV’s power is in
standby status, it will turn on automatically (if [Set] has been selected for the TV’s [Power on
link] setting).
• Depending on your TV’s HDMI connection, on some TV’s it may be necessary to manually
select the HDMI connection you are using. In this case, use the remote control for the TV to
switch the input channel.
(For details on how to switch input, please read the instructions for the TV.)
• If HDTV Link does not work properly, refer to P322.
• If you are unsure whether or not the TV you are using is compatible with HDTV Link, read the
operating instructions for the TV.
• Available linked operations between the camera and a TV is different depending on the types
TVs even if they are compatible with HDTV Link. Refer to the instructions of the TV for the
operations that support on the TV.
• Be sure to use a cable that is HDMI certified.
• Use only a “High Speed HDMI micro cable” with the HDMI logo.
Cables that do not comply with the HDMI standards will not work.
“High Speed HDMI micro cable” [Type D–Type A plug, up to 2m (6p7q) long]
• [HDMI Mode (Play)] for the camera is determined automatically when the HDTV Link is
operating.