Instruction Manual

281
13. Connecting to other equipment
∫ Copying the data
1
Connect the computer and camera with the supplied USB connection
cable.
• Please turn the camera and your computer on before connecting.
• Make sure to use the right plugs for the differing sockets, that the plugs are
aligned correctly and that they are inserted straight.
(Otherwise the connectors may be bent out of shape which may cause
malfunction.)
• Hold the plugs (not the cable) to insert. Do not use any other USB connection cables
except the supplied one or a genuine Leica USB connection cable.
A USB connection cable
B Align the marks, and insert.
C [AV OUT/DIGITAL] terminal
•The color of the terminal is gold.
2
Press 3/4 to select [PC], and then [MENU/SET].
• If [USB Mode] (P50) is set to [PC] in the [Setup] menu in advance, the camera will be
automatically connected to the computer without displaying the [USB Mode] selection
screen.
• If [USB Mode] is set to [PictBridge(PTP)], a message may appear on the computer
screen. In that case, close the message, and remove the USB connection cable safely,
and then set the
[USB Mode] to [PC].
3
Copy the images to the computer using the installed software.
• Use a battery with sufficient battery power. If the remaining battery power becomes low while
the camera and the computer are communicating, the status indicator flashes and the alarm
beeps.
Disconnect the USB connection cable safely. Otherwise, data may be destroyed.
• Before inserting or removing a card, turn the camera off and disconnect the USB connection
cable. Otherwise, data may be destroyed.