Instruction Manual

290
14.
Miscellaneous
Accessories
When you use an external flash unit such as the Leica CF22 (available as accessory P13),
you will have a longer effective flash range than with the built-in flash.
Preparations:
•
Turn off the camera and close the built-in flash.
∫ Using the compatible flash units
1 Mount the flash unit in the hot shoe and then turn on camera and flash.
2 Select the menu item.
3 Press 3/4 to select [Flash Mode] and then [MENU/SET].
4 Press 3/4 to select an item and then [MENU/SET].
•
While the external flash is connected, the following icons are displayed.
External Flash Units
Removing the Hot Shoe Cover
The camera comes with the hot shoe cover in the hot shoe.
To remove the hot shoe cover
1 Press down at the front to unlock
2 Pull out in the direction indicated by the arrow
• When the hot shoe is not in use, make sure to use the cover.
• Please be careful not to lose the hot shoe cover.
• Keep the hot shoe cover out of reach of children to prevent
swallowing.
> [Rec] > [Flash]
: External flash ON
: External flash Slow Sync.
Œ: External flash OFF
MENU