Instruction Manual

14. Miscellaneous
298
Message Displays
Confirmation or error messages will be displayed on the screen in some cases.
The major messages are described below as examples.
[This picture is protected]
•
Delete the picture after canceling the protect setting. (P242)
[Some pictures cannot be deleted]/[This picture cannot be deleted]
•
Pictures not based on the DCF standard cannot be deleted.
Perform formatting (P30) on the camera after saving necessary data on a computer, etc.
[Cannot be set on this picture]
•
[Title Edit], [Text Stamp] or [Print Set] cannot be set for pictures not based on the DCF
standard.
[Memory Card Error
Format this card?]
•
The card has been formatted in a way that cannot be used with the camera.
– Insert a different card.
– Format the card again with the camera after saving necessary data on a computer etc. (P30)
Data will be deleted.
[Please turn camera off and then on again]/[System Error]
•
This is displayed when the lens has stopped operating normally due to being obstructed by a
hand etc.
Turn the camera off and on. If the message persists, contact your Leica dealer or the nearest
Leica Customer Care center.
[Memory Card Error]/[This memory card cannot be used]
•
Use a card compatible with this camera. (P29)
[Insert SD card again]/[Try another card]
•
An error has occurred accessing the card.
Insert the card again.
• Insert a different card.
[Read Error/Write Error
Please check the card]
•
The camera has failed to read or write data.
Remove the card after turning the camera off. Insert the card again, the camera unit on, and
try to read or write the data again.
• The card may be damaged.
• Insert a different card.