Instruction Manual

299
14. Miscellaneous
[Cannot record due to incompatible format(NTSC/PAL) data on this card.]
•
Perform formatting (P30) on the camera after saving necessary data on a computer, etc.
• Insert a different card.
[Motion recording was cancelled due to the limitation of the writing speed of the
card]
•
Depending on the [Rec Quality] of a motion picture, the speed class rating required for the
card differs. Use a card that meets the rating. For details, refer to
“About motion picture
recording and speed class
” on P29.
• If the recording stops even when you are using a card that meets the speed class rating, the
data writing speed is too slow. We recommend making a backup and then to format the card
(P30).
Depending on the type of the card, motion picture recording may stop in the middle.
[A folder cannot be created]
•
A folder cannot be created because there are no remaining folder numbers that can be used.
Format the card on the camera after saving necessary data on a computer etc. (P30)
If you execute [No.Reset] in the [Setup] menu after formatting, the folder number is reset to
100. (P53)
[Picture is displayed for 16:9 TV]/[Picture is displayed for 4:3 TV]
•
Select [TV Aspect] in the [Setup] menu if you want to change the TV aspect ratio. (P51)
• This message also appears when the USB connection cable is connected to the camera only.
If the other end of the USB connection cable is connected to a computer or printer, the
message will disappear. (P281, 284)
[Editing operation cannot proceed as information processing is ongoing.]
When there are too many image files, the currently retrieving information icon ([ ]
or [ ]) may be displayed on the playback screen for a long period of time. During
this time, use of some items in the [Playback] menu is not possible.
–
If the camera is turned off while acquiring information, only the pictures that have already
acquired the information are saved as a group.
When you turn on again, the information retrieval will restart from the same point.