Instruction Manual

323
14. Miscellaneous
• Disconnect the USB connection cable. Connect it again while the card is inserted in the
camera.
• If there are two or more USB terminal on a single computer, try connecting the USB connection
cable to another USB terminal.
• Check if your computer is compatible with SDXC memory cards.
• A message prompting to format the card may be displayed when connecting, but do not format.
• If the [Access] displayed on the monitor does not disappear, disconnect the USB connection
cable after turning the camera off.
• Pictures cannot be printed using a printer that does not support PictBridge.
> Set to [PictBridge(PTP)] in [USB Mode]. (P50, 284)
• When using a printer with a Cropping or borderless printing function, cancel this function before
printing.
(For details, refer to the instructions for the printer.)
• When you order photo studios to print pictures, ask them 16:9 pictures can be printed.
The card is not recognized by the computer.
The card is not recognized by the computer.
(SDXC memory card is used.)
The picture cannot be printed when the camera is connected to a printer.
The ends of the pictures are cut at printing.