Instruction Manual

14. Miscellaneous
324
• It is a sound of lens movement or aperture operation when the camera is turned on or off, and it
is not a malfunction.
• The sound, which is caused by the automatic adjustment of the aperture, is heard when the
brightness has changed due to, for example, zooming or the movement of the camera. This is
not a malfunction.
• Press [MENU/SET], select the [Setup] menu icon [ ] and then select the [~] icon to set the
desired language. (P52)
• This is a highlight function showing the white saturated area. (P72)
• In dark places, the AF Assist Lamp (P150) lights up in red to make it easier to focus on a
subject.
• When using the Extended Optical Zoom, the zooming action will stop temporarily. This is not a
malfunction.
• Is [AF Assist Lamp] set to [ON]? (P150)
• The AF Assist Lamp does not turn on in bright places.
• The surface of the camera and the reverse side of the monitor may become warm during use.
This does not affect the performance or quality of the camera.
• If you do not use the camera for a long time, the clock may be reset.
> [Please set the clock] message will be displayed; please reset the clock. (P34)
Others
There is a sound from the lens unit.
An unreadable language was selected by mistake.
Part of the picture is flashing in black and white.
A red lamp sometimes turns on when the shutter button is pressed halfway.
Zooming stops instantaneously.
The AF Assist Lamp does not turn on.
The camera becomes warm.
The clock is reset.