Instruction Manual

2. Preparations before Recording

• When [Silent Mode] is set to [ON], [Beep Volume] and [Shutter Vol.] are set to [OFF].

• When [Live View Mode] is set to [30fps] the image quality on the recording screen may be

worse than when it is set to [60fps], but this does not affect the recorded image.

• In a dark environment, the frame rate may become slower.

• This will adjust the monitor when the monitor is in use, and the viewfinder when the viewfinder

is in use.

• Some subjects may appear differently than in reality on the monitor. However, this does not

affect the recorded pictures.

[Beep]

Set the volume for electronic noises and the electronic shutter

noise.

[Beep Volume]:

[u] (High)

[t] (Low)

[s] (OFF)

[Shutter Vol.]:

[] (High)

[] (Low)

[] (OFF)

[Live View Mode]

Set the frame rate of the recording screen (Live View screen).

[30fps]: Reduces the power consumption, extending the

operating time.

[60fps]: Displays movements smoother.

[Monitor Display]/

[Viewfinder]

Brightness, color, or red or blue tint of the monitor/viewfinder is

adjusted.

[] ([Brightness]):

For adjusting the brightness.

[] ([Contrast · Saturation]):

For adjusting the contrast or clarity of colors.

[] ([Red Tint]):

For adjusting the red tint.

[] ([Blue Tint]):

For adjusting the blue tint.

1 Select the settings by pressing 3/4, and adjust with

2/1.

•

Adjusting can also be performed by rotating the rear dial.

2 Press [MENU/SET] to set.