Instruction Manual

2. Preparations before Recording

• Press the shutter button halfway or turn the camera off and on to cancel [Sleep Mode].

• To turn the monitor/viewfinder on again, press any button.

• When the monitor/viewfinder automatic switching (P56) is activated, [Auto EVF/Monitor Off] is

canceled.

• [Economy] does not work in the following cases.

– When connecting to a computer or a printer

– When recording or playing back motion pictures

– During a slide show

– [Multi Exp.]

– [Time Lapse Shot]

– When [Auto Shooting] in [Stop Motion Animation] is set to [ON].

– When connect with HDMI in Recording Mode.

[Economy]

The camera can be set up to prevent unnecessary battery

consumption.

[Sleep Mode]:

The camera is automatically turned off if it has not been used for

the time selected on the setting.

[10MIN.]/[5MIN.]/[2MIN.]/[1MIN.]/[OFF]

[Auto EVF/Monitor Off]:

The monitor/viewfinder is automatically turned off if the camera

has not been used for the time selected on the setting.

[5MIN.]/[2MIN.]/[1MIN.]

[USB Mode]

Select the USB communication system when connecting the

camera to your computer or your printer with the USB connection

cable (supplied).

y [Select on connection]:

Select either [PC] or [PictBridge(PTP)] if you connected the

camera to a computer or a printer supporting PictBridge.

{ [PictBridge(PTP)]:

Set when connecting to a printer supporting PictBridge.

z [PC]:

Set when connecting to a computer.