Instruction Manual

51
2. Preparations before Recording
[TV Connection]
• This sets how the camera connects to a television etc.
[Video Out]: (Menu item only available with camera models
18 193 / 18 196.)
Set to match the color television system in each country.
[NTSC]:
Video output is set to NTSC system.
[PAL]:
Video output is set to PAL system.
•
This will operate when an AV or an HDMI micro cable is connected.
[TV Aspect]:
Set to match the type of TV.
[16:9]:
When connecting to a 16:9 screen TV.
[4:3]:
When connecting to a 4:3 screen TV.
•
This will work when an AV cable is connected.
[HDMI Mode (Play)]:
Set the format for the HDMI output when playing back on the
HDMI compatible high-definition TV connected with the camera
using an HDMI micro cable.
[AUTO]:
The output resolution is automatically set based on the
information from the connected TV.
[4K]:
The progressive method with 2160 available scan lines is used
for output. The output size is set to 3840
k2160.
[1080p]:
The progressive method with 1080 available scan lines is used
for output.
[1080i]:
The interlace method with 1080 available scan lines is used for output.
[720p]:
The progressive method with 720 available scan lines is used
for output.
[576p]
¢1
/[480p]
¢2
:
The progressive method with 576
¢1
/480
¢2
available scan lines
is used for output.
¢1When [Video Out] is set to [PAL]
¢2When [Video Out] is set to [NTSC]
• This will work when an HDMI micro cable is connected.
• This will work only during playback.
• If no image appears on the TV with [AUTO], switch the setting to a
constant setting other than [AUTO] to set a format supported by your TV.
(Please read the instructions for the TV.)